A dip in your sparkling swimming pool is the ultimate way to beat the heat and create lasting summer memories. However, there may come a time when you need to drain a swimming pool for maintenance, repairs, or seasonal closure. It may sound like a daunting task, but it’s really not too difficult – if you know what you’re doing, that is!
In this article, we’ll take you on a refreshing journey through the process of draining a swimming pool. From gathering the necessary tools to executing the task with finesse, we’ve got you covered.
So, grab your towel and get ready to dive into the steps of draining a pool with ease and confidence!
Before you start to drain a swimming pool, make sure you have the necessary tools at your disposal. You’ll need a submersible pump, a long discharge hose, a garden hose, and a nearby drainage area or sewer access point.
These items will help you efficiently remove the water from your pool while ensuring it doesn’t cause any damage or flooding.
Once you have your arsenal at hand, you can start preparing your pool for the draining process. Begin by clearing the pool area of any debris or objects that could interfere with the draining process. Then, remove the pool’s skimmer baskets and drain covers to facilitate water flow.
This is also a good opportunity to clean the pool walls and floor, ensuring they are free of dirt and algae buildup. A clean pool not only makes the draining process smoother but also prepares your pool for future use.
Position the submersible pump in the deepest part of your pool, making sure it is fully submerged in water. Be sure to attach the long discharge hose to the pump’s outlet, and securely fasten it to avoid leaks or disconnections during the draining process.
The length of the hose should be sufficient to reach your chosen drainage area without causing any obstruction or water pooling.
Next, you’ll need to connect a garden hose to a nearby water source and use it to prime the submersible pump. This step ensures a steady flow of water and prevents the pump from running dry.
Once primed, direct the discharge hose towards the drainage area or sewer access point. Do your best to ensure that the hose is secure and properly positioned to channel the water away from the pool without causing any flooding or damage to the surrounding area.
As the pump starts working its magic, keep a close eye on the water level in the pool. You’ll want to monitor the draining progress closely to ensure the water flows smoothly and efficiently.
This is also a great time to inspect the pool for any visible signs of damage or areas in need of repair. You may even want to perform routine maintenance tasks, such as scrubbing the pool walls or inspecting the filtration system.
Once the pool water reaches the desired level, switch off the submersible pump and disconnect the power supply. Then, remove the discharge hose from the pump and carefully drain any remaining water from the hose to avoid spills or water damage.
If you have an inground pool, you have one additional step here: opening a hydrostatic pressure relief valve. This will keep your pool from popping.
Now you can either perform your maintenance before filling the pool back up, or put your equipment away for the season. Done!
As you can see, learning how to drain a swimming pool doesn’t have to be difficult. With the right tools, preparation, and a little know-how, you can tackle this maintenance chore with ease. By following the steps outlined in this guide, you’ll be able to drain your pool efficiently and effectively, ensuring clear waters for your enjoyment. Just remember to take necessary safety precautions and consult professionals if you encounter any issues beyond your expertise.
So, dive in, get your pool maintenance groove on, and prepare for a refreshing swim season ahead!
Need a hand with pool maintenance? We’d be happy to help! Click here to get in touch with Clark Pools and Spas, and inquire about our services today.