20 Balsam St, Collingwood, ON L9Y 4H7
Owen Sound (519) 372-9411 Collingwood (705) 445-6165
03 Nov 2026  /  by clark   /   0 Comments

If the power goes out, the best thing you can do for your hot tub is keep the cover closed to retain as much heat as possible. This is especially important during freezing weather, when an extended outage can put your hot tub’s plumbing and equipment at risk of freezing.

It’s not necessarily the only thing you should do, though. Since it’s often hard to say how long an outage will last, it may be worth taking a few extra precautions to protect your hot tub until the power comes back on. In this post, we’ll explain what happens to your hot tub during a power outage, how to protect it, and what to check once power returns.

What Happens to Your Hot Tub When the Power Goes Out?

As you can probably imagine, your hot tub’s heater and pumps stop working in a power outage. So, naturally, the water will gradually start cooling down, and it won’t circulate through the plumbing like it normally would.

Now, this isn’t usually a big deal during warmer weather. But if it’s freezing outside, you have to be a little more careful. As the water cools, any water left sitting in the pipes and equipment could eventually freeze. And since water expands when it freezes, you could end up with cracked pipes or damaged equipment.

How long can a hot tub go without power before freezing?

Unfortunately, there’s no set amount of time a hot tub can go without power before freezing becomes a concern. A well-insulated hot tub with a good cover can hold onto heat for quite a while, but it really depends on how cold it is outside and how warm the water was when the power went out.

For example, losing power for a couple of hours is very different from losing it overnight during a particularly cold Ontario winter. Ultimately, the longer your hot tub sits without heat or circulation, the more you need to worry about freezing.

How Can You Protect Your Hot Tub During a Power Outage?

If your hot tub loses power, the main thing you want to do is keep as much heat in the water as possible. After all, the warmer it stays, the less you have to worry about freezing.

Here are a few ways to help protect your hot tub during a power outage:

  • Leave the cover on. This is probably the easiest thing you can do. Make sure your hot tub cover fits properly and keep it closed, even if you’re tempted to check the water’s temperature. Every time you lift it, you’re letting some of that heat escape.
  • Consider adding some extra insulation. If it’s especially cold outside, you can put blankets over your hot tub cover to help keep the heat in. Just make sure they stay dry and won’t blow away.
  • Add some hot water. If you still have access to hot water indoors, you may be able to use it to help keep your hot tub from cooling down too quickly. Some manufacturers recommend adding hot water with a hose, lifting the cover just enough to slip the hose in.
  • Don’t drain your hot tub. In some cases, this can make things worse, as water can still get trapped in the pipes and equipment, and without the warmth of the surrounding water, it could freeze more quickly. However, if you’re facing an extended outage during freezing weather, properly winterizing your hot tub may become necessary. Since that involves removing water from the plumbing and equipment, it’s best to get professional advice before attempting it. 

And while some manufacturers recommend using a heater to protect the equipment during an extended outage, don’t attempt this without first checking your hot tub’s manual or speaking with a professional. Using the wrong heater or improper setup could create a fire or electrical hazard.

If you’re worried about freezing during a longer outage, it’s better to consult your manual or contact a hot tub professional for advice on protecting your particular model.

What Should You Do With Your Hot Tub When the Power Comes Back On?

Well, one thing you shouldn’t do is jump straight back into your hot tub. Even if everything seems normal at first, it’s worth taking a few minutes to check for any problems, especially if the outage lasted a while during freezing weather.

Check your hot tub for the following after a power outage:

  • Does it turn back on? Check the control panel to see if everything has started up normally. If you see an error message, check your owner’s manual to find out what it means.
  • Is the water circulating? Your pumps should start moving water through the system again. If the water isn’t circulating properly or you hear unusual noises, don’t keep running the hot tub.
  • Is the water heating up? Check the water temperature and make sure the heater is working. Depending on how much the water cooled down, it could take several hours to reach your usual temperature.
  • Are there any leaks? Take a look around your hot tub for any water that shouldn’t be there. If you notice water leaking from the cabinet or the water level dropping unexpectedly, there could be damage to the plumbing or equipment.
  • Is the water okay? Since your hot tub hasn’t been circulating or filtering the water normally, it’s worth checking the sanitizer and pH levels. Make any necessary adjustments before getting back in.

If you notice anything unusual during these checks, don’t ignore it. Even if your hot tub turns back on, that doesn’t necessarily mean everything survived the outage without damage.

Worried About Your Hot Tub After a Power Outage?

Some hot tub problems aren’t easy to diagnose on your own, especially when it comes to the plumbing and equipment. So, rather than risk making the problem worse, it can be worth having a professional take a look before using your hot tub again.

Here at Clark Pools & Spas, our experienced technicians can help you figure out what’s wrong and get your hot tub running properly again. For professional hot tub repair services in Collingwood and the surrounding area, contact our team today.

Leave a Comment

Your email address will not be published. Required fields are marked *